Book contents
Contents
raw Math
RAW Book Differential Geometry Curve Geometry

Introduction to Curvature

Robert Eisele

A curve can remain the same length while its direction changes. Draw a horizontal line on paper and wrap the paper around a cylinder. The ink keeps its length. Follow it around the cylinder and its tangent rotates in the plane of the circular cross-section. The first fundamental form measures the paper's local lengths and angles. Curvature measures what happens to the direction.

Turning per Unit Length

On a circle of radius \(R\), an arc of length \(\Delta s\) turns the tangent by \(\Delta\theta=\Delta s/R\). Thus a large circle changes direction more slowly than a small one. Curvature is the limit of turning per arc length:

\[ \kappa_s =\lim_{\Delta s\to0}{\Delta\theta\over\Delta s} ={d\theta\over ds}. \]

The subscript denotes the signed curvature of an oriented plane curve. As you travel along the oriented curve, a left turn of the tangent counts positive and a right turn counts negative. Arc length is measured in metres, so curvature has units of inverse metres.

R = 2.00 m · Δθ = 0.50 rad
The highlighted arc always has length one metre. Increasing the radius brings the two tangent directions closer together: \(\Delta\theta=1/R\).

A Unit Tangent Separates Direction from Speed

Let \(\mathbf c(t)\) trace a regular curve, meaning that \(\mathbf c'(t)\neq\mathbf0\). Its speed is \(v=ds/dt=\|\mathbf c'(t)\|\). Dividing the velocity by its speed gives the unit tangent \(\mathbf T=\mathbf c'/v\).

Although \(\mathbf T\) is dimensionless, its tip moves on the unit circle or unit sphere. Measuring that motion against travelled arc length gives the curvature vector:

\[ \mathbf K={d\mathbf T\over ds}, \qquad \kappa=\|\mathbf K\|. \]

Differentiating \(\mathbf T\cdot\mathbf T=1\) gives \(2\mathbf T\cdot\mathbf K=0\). The change in tangent therefore points perpendicular to the tangent, toward the inside of the bend.

Signed Curvature in the Plane

Write \(\mathbf T=(\cos\theta,\sin\theta)\). Then \(d\mathbf T/ds=(d\theta/ds)(-\sin\theta,\cos\theta)=\kappa_s\mathbf N_L\), where \(\mathbf N_L=(-\sin\theta,\cos\theta)\) points left. The sign reports whether the tangent turns left or right.

Acceleration Splits into Speed and Turning

A general parameter mixes two effects. From \(\mathbf c'=v\mathbf T\), the product rule gives

\[ \mathbf c''=v'\mathbf T+v^2\mathbf K. \]

The first term changes speed along the existing tangent. The second term bends the path. This is why a car at the same curvature needs four times the normal acceleration when its speed doubles.

The Wedge Removes Tangential Acceleration

Two vectors sharing a tail span a parallelogram. Their exterior product \(\mathbf a\wedge\mathbf b\) is the oriented area, a bivector rather than a scalar in the general case. Sliding one vector parallel to the other leaves its area unchanged:

\[ \mathbf a\wedge(\mathbf b+\lambda\mathbf a)=\mathbf a\wedge\mathbf b. \]
a∥ = 0.65 · signed area unchanged
Blue is velocity, orange is acceleration. Move the tangential component along the dashed line. The parallelogram changes shape, but its signed area remains fixed.

Taking the wedge of velocity with acceleration removes the speed-change term:

\[ \mathbf c'\wedge\mathbf c'' =(v\mathbf T)\wedge(v'\mathbf T+v^2\mathbf K) =v^3\,\mathbf T\wedge\mathbf K. \]

The factor \(v^3\) has a geometric explanation: velocity contributes one factor and acceleration contributes two. Dividing it out leaves the parameter-independent curvature bivector

\[ \mathcal K =\mathbf T\wedge\mathbf K ={\mathbf c'\wedge\mathbf c''\over\|\mathbf c'\|^3}. \]

Changing how fast the parameter runs leaves the bivector unchanged. Reversing traversal reverses its orientation and preserves its magnitude. Since \(\mathbf T\) and \(\mathbf K\) are perpendicular unit/normal factors, the magnitude of \(\mathcal K\) is \(\kappa\). In an oriented plane, every bivector is a multiple of \(\mathbf e_x\wedge\mathbf e_y\), and its coefficient is the signed curvature.

Planar and Spatial Curvature Formulas

For \(\mathbf c(t)=(x(t),y(t))\), the coefficient is

\[ \kappa_s={x'y''-y'x''\over(x'^2+y'^2)^{3/2}}. \]

In three dimensions, the same oriented plane is represented by \(\mathbf c'\times\mathbf c''\). Its length gives

\[ \kappa={\|\mathbf c'\times\mathbf c''\|\over\|\mathbf c'\|^3}. \]

These formulas require a regular parameter. At a stationary parameter value the quotient is undefined. If the same curve admits a regular local parametrization, evaluate its curvature there. At a regular point of zero curvature, the first two derivatives do not determine an osculating plane.

Example: A Helix

The helix \(\mathbf c(t)=(R\cos t,R\sin t,at)\) has speed \(v=\sqrt{R^2+a^2}\) and inward acceleration magnitude \(R\). Constant speed gives \(\kappa=R/(R^2+a^2)\). Setting \(a=0\) recovers a circle, while a steeper helix turns less per metre.

The Osculating Circle

At a regular point, Taylor expansion in arc length gives

\[ \mathbf c(s+h) =\mathbf c(s)+h\mathbf T(s)+{h^2\over2}\mathbf K(s)+o(h^2). \]

The first term fixes position, the second tangent direction, and the third the bending vector. The unique circle matching these terms is the osculating circle. Its radius and centre are

\[ \rho={1\over|\kappa_s|}, \qquad \mathbf C=\mathbf c+{\mathbf N_L\over\kappa_s},\qquad\kappa_s\ne0. \]

Tight bends have small radii and large curvatures. Near an inflection, the curvature changes sign: the centre recedes without bound, and the osculating circle reappears on the other side.

Reading a Cubic Bézier Curve

For control points \(\mathbf P_0,\ldots,\mathbf P_3\), let \(\Delta\mathbf P_i=\mathbf P_{i+1}-\mathbf P_i\). Exact derivatives are

\[ \mathbf B'=3\big((1-t)^2\Delta\mathbf P_0+2(1-t)t\Delta\mathbf P_1+t^2\Delta\mathbf P_2\big), \] \[ \mathbf B''=6\big((1-t)(\Delta\mathbf P_1-\Delta\mathbf P_0) +t(\Delta\mathbf P_2-\Delta\mathbf P_1)\big). \]
t = 0.280
Drag a control point. The blue comb is \(\kappa_s\mathbf N_L\), the orange circle is osculating, and the dark arrow is the unit tangent. On the initial curve, move the probe through \(t=0.5\). The probe tooth shrinks to zero as the osculating circle radius tends to infinity.

Curvature Continuity at a Join

Two segments can meet with the same forward tangent even if their curvatures jump. Matching tangent and signed curvature gives geometric curvature continuity, denoted \(G^2\). For \(y=y(x)\), \(\kappa_s=y''/(1+y'^2)^{3/2}\). Joining \(y=0\) for \(x\le0\) to \(y=x^2\) for \(x\ge0\) gives a jump from zero to two. Replacing the right branch with \(y=x^3\) keeps curvature zero at the join, but curvature still begins to grow immediately on the right. With the quadratic branch, the required steering angle jumps at the join. With the cubic branch, the steering angle is continuous, but at constant forward speed its rate of change still jumps.

\[ \delta=\arctan(L\kappa_s) \quad\Longrightarrow\quad \dot\delta= {Lv\over1+(L\kappa_s)^2} {d\kappa_s\over ds}. \]
κₛ at join: 0 → 2 m⁻¹
The comb shows a curvature defect before a visible outline can reveal it. The blue path continues horizontally at the marked join in both examples.

From Curve Curvature to Robot Motion

The formulas above describe a curve. A wheeled robot also has a pose, a steering limit, and a path distance. The curvature chapter supplies the unit tangent and signed curvature; the controller then combines them with lateral displacement and heading error. This separation is developed in Introduction to Path Following for Wheeled Robots.

Back to the Cylinder

Wrapping paper around a cylinder preserves local lengths and angles, even though a circumferential line gains spatial curvature \(1/R\). An axial line remains straight. The difference is directional bending on a surface, which leads to the principal curvatures and Gaussian curvature. They belong to the next chapter: curvature of a surface is not the curvature of every curve chosen across it.