Printable workshop helpers, mounts, adapters, and small machine parts. Rotate each 3D preview in the browser, open an object for its details, and download the available source or print files directly.
Routing Templates
Reusable guides for routing consistent corner radii.
Router Corner Radius Templates Three paired templates for routing repeatable outside corner radii.
Each plate combines two radii: 10/15 mm, 20/25 mm, or 30/35 mm. Pick the pair that brackets the corner sizes used most often in the shop.
Profile and Rail Mounts
Drilling, bracing, and mounting parts for aluminum profiles and DIN rails.
2040 Extrusion Drill Guide A drill guide that slips over 2040 aluminum extrusion.
The guide positions a drill on a 2040 profile so holes can be made consistently without measuring each location from scratch.
2040 Extrusion Foot Cap A push-on end cap that lets a vertical 2040 aluminum extrusion stand on a finished foot.
The cap fits over the end of a 2040 profile and provides a dedicated contact surface when the extrusion is used as a leg or upright support.
2020 T-Slot 45 Degree Brace Connector A connector for adding a 45 degree brace to 2020 T-slot extrusion.
This is a structural connector for attaching a diagonal support to a 2020 profile assembly, not a drilling template.
Arduino DIN Rail Mount A compact carrier for mounting an Arduino on a DIN rail.
The printed holder keeps an Arduino board attached to standard DIN rail installations while leaving the board accessible for wiring and service.
Workshop Machine Accessories
Small adapters and supports built around specific workshop machines.
Bosch GCM 8 SDE to Metabo Dust Adapter A simple dust-port adapter between the Bosch saw and a Metabo vacuum.
The adapter joins the dust outlet of a Bosch GCM 8 SDE miter saw to the hose used by a Metabo shop vacuum.
Bosch GCM 8 SDE Workpiece Support A matching-height support for cutting long stock on the Bosch GCM.
Place the support beside the saw to keep longer workpieces level with the Bosch GCM 8 SDE table during a cut.
General Hardware
Printable layout tools, motor mounts, and everyday fasteners.
Circular Center Finder A one-piece guide for marking the center of round stock.
Slide the one-piece guide over a round workpiece and draw along the reference edge. The design omits an unnecessary metric scale, while the OpenSCAD source and PolyEdge library allow its dimensions and geometry to be fully customized before printing.
Dependency: PolyEdge. Required by the OpenSCAD source to generate the rounded polygon profiles.
NEMA 17 Right Angle Mount A conventional 90 degree bracket for mounting a NEMA 17 stepper motor.
The bracket holds a NEMA 17 motor perpendicular to a base or frame and provides a straightforward printable alternative to a metal angle bracket.
M6 Wing Nut A printable wing nut for standard M6 screws and threaded rod.
The broad wings make an M6 fastener easier to tighten and release by hand when a conventional hex nut would require a tool.